Duratrax Onyx 210 AC/DC Peak Charger w/ LCD DTXP4210

DuraTrax Onyx 210 AC/DC Peak Charger with Backlit LCD

This is the DuraTrax Onyx 210 AC/DC Peak Charger with Backlit LCD.
Charge currents of 800mA, 1.5A, 3A and 5A plus 4-8 cell NiCd or NiMH
compatibility makes this charger great for 1/18-1/8 scale electrics,
nitro receiver packs and even transmitter batteries.

FEATURES: Charges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells with a capacity
range of 750-7500mAh
NiCd and NiMH compatibility with custom peak detection
Pushbutton controls, audible tones and a custom LED with backlight
for easy setup and use
Selectable charge currents of 800mA, 1.5A, 3A and 5A
Automatic TRICKLE charge fills pack completely after peak charge for
optimum battery performance
Precise peak detection algorithm with automatic TRICKLE charge fills
packs completely for optimum voltage and run time
Built-in jack included for charging 4 or 5 cell NiCd or NiMH
receiver batteries for nitro models and even transmitter batteries
LCD shows battery voltage, charge current, time, capacity, battery
type and more
Small, lightweight switching AC power supply delivers up to 5 amps
of charge current
Solid state reverse polarity and current overload safety devices
FIVE YEAR warranty

INCLUDES: DuraTrax Onyx 210 AC/DC Sport Peak Charger

SPECS:    AC Input: 110V AC 60Hz
DC Input: 11-15V DC, built-in lead with alligator clips
Battery Types: 4-8 NiCd or NiMH cells (4.8-9.6V)
Battery Capacity Range:  750-7500mAh
Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (40W)
Fast Charge Termination: Peak detection
Fast Charge Safety Timer: 90 minutes
Peak Sensitivity: 8mV for NiCd, 4mV for NiMH
Auto TRICKLE Current: 1/20 fast charge setting
Input Control: 3-pushbuttons
Display Type: 7-segment custom LCD with backlight
Audible Tones: Indicate start, stop, errors
*Output Connections: Built-in lead with standard connector
Built-in jack for charging 4 or 5 cell Rx or Tx packs
*Standard to Deans Ultra Male Adapter available
separately (GPMM3131)
*Standard to Vendetta, MiniQuake, RS4 Battery
available separately (DTXC2210)
Protective Devices: Solid-state reverse polarity and current overload
Case size: 5.75 x 5.25 x 1.81" (146 x 133 x 46mm)
Weight: 19.2oz (543g)