Traxxas Bandit VXL Brushless Buggy New In Stock 2408

SquareTrade © AP6.0... This is the 1/10 Scale, Radio Controlled, Ready-to-Run Traxxas Bandit VXL Brushless Motor Powered Off-Road Buggy. **Additional Technical Info Will Be Added When It Becomes Available.** Equipped with the Velineon Extreme Brushless Power System consisting of; Traxxas High Current Connector Maxx...

SquareTrade © AP6.0

This is the 1/10 Scale, Radio Controlled, Ready-to-Run
Traxxas Bandit VXL Brushless Motor Powered Off-Road Buggy.

**Additional Technical Info Will Be Added When It Becomes Available.**

Equipped with the Velineon Extreme Brushless Power System consisting of;
Traxxas High Current Connector
Maxx Cable 12 Gauge Wire
Velineon 3500 Brushless Motor
Velineon VXL-3s Fwd/Rev/Brake Electronic Speed Control

FEATURES: Chassis: Fiber composite bathtub style .15" ( 4mm) thick
Drive: Rear wheel drive
Motor: Traxxas Velineon 3500 brushless
Radio: Traxxas  pistol grip with laydown didital high torque
steering servo that enhances low CG design, transmitter does not
have charge jack
Speed Control: Traxxas Velineon VXL-3s Forward/Reverse/Brake
Shocks: Ultra Shocks with powder coated White springs
Gearbox: Sealed
Differentials: Planetary gear type with hardened steel gears
Transmission: Three gear variable ratio with sealed ball bearings and
telescoping driveshafts
Slipper Clutch: Revo Spec Torque-Control-adjustable to provide
consistent traction control
Tires: Alias 2.2 racing tires, stepped pin rear and ribbed front
Wheels: 2.2" (56mm) Black Chrome finish Tracer 5-spoke
Body: Traxxas ProGraphix painted body with wing
Bumpers: Front, Black plastic
Suspension: Live axle front with centered kingpin
Camber Tie Rods: Fixed non-adjustable
Steering Tie Rods: Adjustable with Jato style steel turnbuckles and
heavy duty rod ends
Steering: Bell-crank with laydown servo placement and servo saver
new design front steering spindles with 5x11mm rubber sealed
bearings
INCLUDES: Traxxas Bandit VXL, Velineon Brushless motor, Velineon VXL-3s ESC,
-- tooth pinion gear, -- tooth optional pinion
gear, Black-Chrome tracer 2.2" wheels, -- spur gear, instructions,
wrenches, aftermarket servo adapters, pre-load spacers &
shock pistons, battery pad, replacement screws, body clips and
washers

REQUIRES: Radio Batteries: (8) AA size
Battery:
Charger:
Misc. Items: Building and track equipment

SPECS:      VEHICLE-
Length:       16.25" (413mm)
Width:        10.25  (260mm)
Height:        7"    (178mm)
Weight:        3.0"  (1380g) with body
Wheelbase:    11.12" (283mm)
Tread: Front-  9.1" (232mm) Rear- 8.25" (209mm) side-to-side at wheel
centers
Front Track:   9.25" (235mm)
Rear Track:    9.52" (242mm)
Ground Clearance: 1" (25mm)
BODY-
Length:       14.75" (375mm)
Width:         5.4"  (138mm) at rear wheels (widest point)
1.5"   (39mm) behind from wheels (thinnest point)
Height:        3.7"   (95mm)

COMMENTS: For replacement or to upgrade to ball bearings use:
Qty.  Size      Location              Bearing Set
4    5x11mm    Front Wheels           order 2 DTXC1547
4    5x11mm    Rear  Wheels           order 2 DTXC1547
6    5x11mm    Transmission           order 3 DTXC1547

Check out my other items!

Be sure to add me to your favorites list!

---

On Jul-01-07 at 18:08:47 PDT, seller added the following information:

Use the FREE Counters 1 million sellers do - Andale!