DuraTrax IntelliPeak ICE DC Charger NiMH NiCD LiPo ION

This is the DuraTrax Ice Battery Charger, Discharger and Cycler. *** Five-Year Warranty *** FEATURES: Handles 1-10 NiCd or NiMH cells, and 1-4 Lithium Ion (Li-Ion) or Lithium Polymer (LiPo) cells Wide adjustable current ranges for Fast Charge (.1A-8A) and Discharge (.1A-10A)...

This is the DuraTrax Ice Battery Charger, Discharger and Cycler.

*** Five-Year Warranty ***

FEATURES: Handles 1-10 NiCd or NiMH cells, and 1-4 Lithium Ion (Li-Ion) or
Lithium Polymer (LiPo) cells
Wide adjustable current ranges for Fast Charge (.1A-8A) and
Discharge (.1A-10A) are ideal for electric cars, trucks and boats
Four Charge modes: Linear, Reflex, Impulse, and 4-step*
* The optional battery temperature monitor is required for 4-step
Charge feature (DTXP4171)
"Constant Current/Constant Voltage" Charge method for Li-Ion/LiPo
batteries
Reverse Polarity Protection
Peak Detection with adjustable sensitivity for NiCd & NiMH batteries
0-500mA adjustable TRICKLE Charge current for NiCd and NiMH
.8V-1.1V adjustable Discharge cut-off voltage for NiCd and NiMH
2.5V-3.7V adjustable Discharge cut-off voltage for Li-Ion/LiPo
Performs 1-10 cycles (NiCd and NiMH only)-retrieves data for 10 full
cycles
Stores info for up to 10 batteries in memory by custom names for easy
recall and charger set-up
LCD screen shows 8 lines of data and 21 characters per line
1-8V adjustable output, time adjustable from 1-120 minutes and
10A Constant Current (30A surge) for motor break-in
Also breaks-in electric motors and operates commutator lathes

INCLUDES: One DuraTrax IntelliPeak ICE charger w/ banana jacks on output lead,
**   alligator clip charge leads, Tamiya style charge lead, input lead
with pre-installed banana plugs, large alligator clips, and
instruction manual

REQUIRES: 12V DC power from a Power Supply or automotive battery or
Hobbico 12V Power Supply (HCAP0250) or
Rivergate 15A DC Bulldog Power Supply (RHCP2015)
To achieve ICE's absolute maximum output power capabilities the
DC power source must be capable of delivering at least 15A while
maintaining 12V DC (although 12.5A is enough for most functions).
Charge Leads depending on type of battery;
DTXC2220  Charge Lead Banana to Standard
DTXC2221  Charge Lead Banana to DNS Male
DTXC2222  Charge Lead Banana to Traxxas
DTXC2223  Charge Lead Banana to Mini Plug
HCAP0101  Futaba J Tx/Rx Charge Leads NO 9VAP
HCAP0102  Futaba J Tx/Rx Charge Leads 9VAP ONLY
HCAP0105  JR Tx/Rx Charge Leads
HCAP0106  Hitec/Airtronics Z Tx/Rx Charge Leads
GPMM3149  Charge Lead Banana/Deans Micro

SPECS:    Input Voltage: 11-15V DC

Battery Types, # of cells:
1-10 Nickel Cadmium cell (1.2-12V)
1-10 Nickel Metal Hydride cells (1.2-12V)
1-4 Lithium Ion or Lithium Polymer cells
(3.6-14.8V)
Battery Capacity Range: 100-9900mAh
Fast Charge Current: .1-8A Linear, Reflex, Impulse and 4-step
Fast Charge Termination: Peak Detection for NiCd and NiMH
"Constant Current/Constant Voltage" for
Li-Ion/LiPo, optional thermal cutoff for
all battery types
Peak Sensitivity: 0-25mV adjustable
TRICKLE Charge Current: 0-500mA (n/a for Li-Ion/LiPo)
Discharge Current: .1-10A adjustable
Discharge Cut-Off Voltage: .8-1.1V per cell NiCd & NiMH
2.5-3.7V per cell Li-Ion/LiPo
Temperature Cut-Off Range: 50-132°F
Cycle Count: one to ten (n/a for Li-Ion/LiPo)
Cycle Cooloff Delay: 1-30 minutes, adjustable
Battery Memories: 10
Display Type: 8x21 LCD (168 characters max)
Graphical Displays: Graphs Charge and Discharge Voltage curves
Output Connectors: Banana jacks
Motor Break-in: 1-8V selectable, 1-120 minutes, 10A constant
Case Size: 5.5" x 1.8" x 5.9" (140x45x150mm)
Weight: 21oz (605g)