New HPI Savage XL 5.9 GT Monster Truck RTR 10515

This is the radio controlled, glow powered, ready-to-runHPI Savage XL 5.9 Monster Truck... FEATURES: Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.12"(3mm) thickDrive: Four wheel shaft drivenEngine: HPI Nitro Star K5.9 .36 cu in (5.9cc), ABC cylinder andpiston construction, three needle composite...

This is the radio controlled, glow powered, ready-to-run

HPI Savage XL 5.9 Monster Truck.

FEATURES: Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.12"

(3mm) thick

Drive: Four wheel shaft driven

Engine: HPI Nitro Star K5.9 .36 cu in (5.9cc), ABC cylinder and

piston construction, three needle composite bodied slide valve

carburetor with 9.5mm inlet, dual stage air filter, starts with

included HPI Roto Start 2 shaft drive electric starter, one-piece

engine mount and 0.12" (3mm) mounting plate

Exhaust: Polished aluminum two-chamber tuned pipe and polished

aluminum manifold

Radio: HPI TF-3 with steering and throttle trim and servo

reversing on both channels,

1200mAh NiMH receiver battery and charger

Servos: SF-1 standard servo for throttle, SF-5 high torque servo

with 8.9kg/cm2 at 6 volts

Wheels: Chrome plated with 17mm aluminum hex

hubs, " ( mm) diameter, " ( mm) wide

Tires: HPI Terra Pin with spike pattern for grass and loose dirt

and center chevron pattern for directional stability, " ( mm)

diameter, " ( mm) wide

Shocks: Eight long-stroke oil-filled

Fuel Tank: 5.4oz (160cc), flip top cap

Clutch: Three shoe aluminum

Clutch Bell: Heavy duty vented -- tooth

Body: Painted and trimmed 0.60" (15.2mm) thick polycarbonate GT

Gigante monster truck

Suspension: Double wishbone with lightweight suspension arms

Caster: Adjustable front and rear toe-in, caster/toe-in refers to the

angle of the front suspension when viewed from the side of the car

Camber:

Brake: Machined steel hub and dual red fiberglass brake discs

Transmission: Three-speed with metal gears and adjustable shift

point

Differentials: Alloy cases with with machined steel rings and pinion

bevel gears with new larger machined steel diff outdrives and axles

Slipper Clutch: Heavy duty dual slipper plates and shock absorbing

rubber pad

Spur Gear: Machined steel 52 tooth

Ball Bearings: Full set, rubber sealed

Steering: Bell crank with cam-type servo saver steering arms

Warranty Period: Two year limited

INCLUDES: HPI Savage XL 5.9 Monster Truck with HPI Nitro Star K5.9 engine,

Roto Start electric starter, glow plug, air filter, - channel

radio, standard throttle servo, high-torque steering servo, hump

receiver pack, wall charger, painted and trimmed body, instruction

manual

REQUIRES: AA Batteries: Eight for transmitter

Fuel: Car blend with 20% nitro content

Battery: 7.2V stick pack with standard connector for Roto Start

Battery Charger: Timed or peak for Roto Start battery

Glow starter, fuel bottle and track equipment

SPECS: Vehicle-

Length: 22.4" (570mm)

Width: 17.1" (435mm)

Height: 10" (254mm)

Wheelbase: 15.3" (390mm) wheels on-center front-to-rear

Suspension Travel:

Tires- Front and Rear:

Body-

Length:

Width:

Height:

Thickness: 0.60" (15.2mm)